VIAIR 200 PSI FAST FILL AIR SOURCE KIT 380C WITH COMPRESSOR AND 2 GALLON TANK
Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 3/8-inch port compression fitting for 1/2-inch air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. A 40-amp relay and an appropriately-rated fuse is recommended for use with this unit.
- 380C Pewter Air Compressor
- 2 Gallon Air Tank
- Pressure Switch (165 PSI On / 200 PSI Off)
- Safety Valve (250 PSI)
- Drain Cock
- Leader Hose with Check Valve
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 PSI
Max. Working Pressure: 200 PSI
Max. Amp Draw: 18 Amps
Net Weight: 21.05 lbs.
Air Tank Temperature Rating: -40°C ~ +80°C
Air Tank Temperature Rating: -40°F ~ +176°F
Fill Rates2.0 Gallon TankFill Rate0 To 200 PSI5 Min 39 Sec.165 To 200 PSI1 Min 29 Sec.