150 PSI Air Source Kits come with a powerful, 30% duty cycle, 280C VIAIR compressor mounted on a 150 PSI-rated 2.0 gallon air tank with 5 ports. All Air Source kits come with a pre-wired pressure switch (P/N 20005 / 110-150 PSI). The 150 PSI Air Source Kit comes complete with a 1/4″ NPT brass drain cock, 1/4″ NPT ASME coded and certified safety valve, 1/2″ NPT port compression fitting for 3/8″ (I.D.) air line pre-installed. To use, simply connect the pressure switch to fused power, make a solid ground, and connect an air line to the compression fitting. The use of a 40-amp relay and an appropriately-rated fuse is strongly recommended to preserve the life of the pressure switch.
|FEATURES– 280C Pewter Air Compressor– 2.0 Gallon Air Tank– Pressure Switch (110 PSI On / 145 PSI Off)– Safety Valve (175 PSI)– Drain Cock– Leader Hose with Check Valve––||SPECIFICATIONS– 12-Volt– Permanent Magnetic Motor– Duty Cycle: 30% @ 100 PSI– Max. Working Pressure: 150 PSI– Max. Amp Draw: 19 Amps– Ingress Protection Rating: IP54– Dimensions: 18.9″L x 5.9″W x 13.7″H– Net Weight: 19.75 lbs.|
* Supply Voltage: 13.8 Volts
|2.0 GALLON TANK||FILL RATE0 to 145 PSI3 min. 40 sec.(± 10 sec.)110 to 145 PSI1 min. 15 sec. (± 05 sec.)|